Guide

Connect Your Own Phone Line to Your AI Voice Agent — Outbound and Inbound, Step by Step

Shivam Yadav
Shivam Yadav
Co-Founder & Software Engineer, TaskVox AI
4 November 2026·8 min read
Quick answer

Go to Settings → Phone & Calling → My own carrier, copy four details from your Twilio, Plivo or SIP provider (SIP domain, username, password, your number) and press Send for activation. After our team activates it, every call of your account goes out from your number. For incoming calls, choose the agent that answers and point your provider's inbound trunk to sip:135.235.186.152:5060.

Before you start

  1. Paid account. Own lines are for paid accounts. Free account? Recharge once (from ₹500) under Billing.
  2. A SIP trunk at your provider (Twilio Elastic SIP Trunking, Plivo Zentrunk, or any SIP provider) with username / password login.
  3. Your number on that provider — calls show this number to the people you call.
  4. Indian mobiles allowed: your provider account must be allowed to call Indian numbers. For India, providers usually need an India account / region and KYC — check with them first.
  5. Cost: minutes come from your credits at the normal rate; your provider bills its own call charges.

Outbound — calls go out from your number

  1. Open Settings → Phone & Calling and choose My own carrier.
  2. Pick your provider tab — Twilio, Plivo or Other SIP provider.
  3. Follow the provider steps below, then fill the four boxes: SIP domain, Your number, SIP username, SIP password.
  4. Leave Advanced as it is unless your provider says otherwise (number format +91…, calls at the same time, port 5060, UDP).

Twilio

  1. In Twilio open Elastic SIP Trunking → Trunks and open (or create) your trunk.
  2. Termination: copy the Termination SIP URI (ends with pstn.twilio.com) into SIP domain.
  3. Under Termination → Authentication add a Credential List; put its username and password in TaskVox.
  4. Add our server's address to the trunk's IP access list: 135.235.186.152.

Plivo

  1. In Plivo open Zentrunk → Outbound Trunks and open (or create) your trunk.
  2. Copy the trunk's termination SIP domain (ends with zt.plivo.com) into SIP domain.
  3. Attach a credentials list to the trunk; put its username and password in TaskVox.
  4. If the trunk uses an IP access list, add 135.235.186.152.
  5. Use a number from your Plivo account as Your number.

Other SIP provider

  1. Ask your provider for a SIP trunk with username / password authentication.
  2. Put the SIP domain (or IP), port, username and password in TaskVox.
  3. Ask them to allow our server's address: 135.235.186.152.

Send for activation

  1. Press Send for activation. The status shows Waiting for activation.
  2. Our team checks the line and connects it — usually within 1 working day. Your calls keep using TaskVox numbers until then.
  3. If something needs fixing, you see our note on the same page. Fix it and send again.
  4. When the status shows Active, every campaign, test call and transfer goes out on your line.
  5. Changed your password, domain or number later? Press Save changes — the line goes back for a quick check. Saving without a change keeps it live.

Inbound — callers reach your AI agent

Optional. Do this only if people who call your number should be answered by your AI agent.

  1. On Phone & Calling, in Incoming calls on your number, choose the Agent that answers and press Save agent. No agent chosen = incoming calls are refused.
  2. At your provider, point the number's inbound trunk to sip:135.235.186.152:5060 (steps below).
  3. Twilio and Plivo: nothing else to fill — we already accept calls from their servers. Other SIP providers: ask for the IP addresses they send calls from and enter them in Connect your line → Advanced → Inbound.
  4. Only calls made to the number saved on your line are answered. Attach that same number to the inbound trunk.
  5. Incoming calls work once the line is Active. Changing the answering agent later works within a minute — no re-check needed.

Twilio

  1. Open your trunk → Origination → add an Origination URI: sip:135.235.186.152:5060.
  2. Under Numbers, add your number to this trunk. That's all — Twilio's servers are already accepted.

Plivo

  1. Open Zentrunk → Inbound Trunks and create a trunk.
  2. Set its primary URI to sip:135.235.186.152:5060 (UDP).
  3. Under Current Phone Numbers, select your number → Link Selected Numbers. That's all — Plivo's servers are already accepted.

Other SIP provider

  1. Ask your provider to send calls for your number to sip:135.235.186.152:5060.
  2. Ask for the IP addresses they send calls from and enter them in the Inbound field.

Test both directions

  1. Outbound: open your agent → Test call → your own mobile. Your phone should show your number.
  2. Inbound: from another phone, call your number. Your chosen agent should answer.
  3. Open Call Logs — both calls appear with their recording and transcript.

Common problems and fixes

What you seeWhat to do
“My own carrier” is greyFree account — recharge once to unlock it.
Outbound calls fail at onceCheck the SIP domain, username and password; check your provider allows calls to Indian mobiles and that 135.235.186.152 is allowed.
People see a different numberYour number must be a number on the same provider account.
Incoming calls are not answeredChoose an answering agent; check the inbound trunk points to sip:135.235.186.152:5060 and has the same number as your line; other SIP providers: check their IP addresses are in the Inbound field.
Status went back to “Waiting for activation”You changed the line details — our team re-checks them; calls use TaskVox numbers meanwhile.

Switch back to TaskVox numbers

  1. Open Settings → Phone & Calling.
  2. Press Switch to TaskVox numbers and confirm.
  3. New calls use TaskVox numbers at once. Your line details stay saved if you want to switch back.

Frequently asked questions

Who can connect their own line?

Every paid account. On a free account, recharge once (from ₹500) and the option unlocks on Settings → Phone & Calling.

What does it cost?

Call minutes are charged from your credits at the normal rate. Your phone provider bills its own call charges to you separately.

Does it change my campaigns or agents?

No. Once your line is active, every campaign, test call and transfer of your account goes out on it automatically — nothing to set per campaign.

Can I go back to TaskVox numbers?

Yes, any time: Settings → Phone & Calling → Switch to TaskVox numbers. New calls use TaskVox numbers at once and your line details stay saved.

Do I need both outbound and inbound?

No. Outbound works on its own. Inbound is optional — set it up only if callers should reach your AI agent on your number.

Why are my incoming calls not answered?

Usually one of three things: no answering agent chosen, your inbound trunk does not point to sip:135.235.186.152:5060, or the number attached to the inbound trunk is not the number saved on your line. For other SIP providers, also check their IP addresses are in the Inbound field.

Shivam Yadav
Co-Founder & Software Engineer, TaskVox AI

Full-stack AI engineer specialising in voice AI, real-time communication systems and telephony. Built the TaskVox AI calling platform from the ground up. More articles →

Your number, your carrier, our AI agents

100 free credits to test · own line on every paid account

Read next